MVP Watt

The MVP Watt is a neutral, high-glide putter built to hold the release angle with very little fade. Its clean, beadless feel and effortless carry make it a natural choice for straight throwing lines and controlled touch shots.

With flight numbers of 2 | 5 | -0.5 | 0.5, the Watt can handle gentle hyzer-flips, soft turnovers, and dead-straight approaches. It is especially useful when you want putter control with added glide and minimal ground play.

MVP Control

The MVP Control is a stable distance driver designed to balance workable distance with dependable accuracy. Its subtle high-speed turn helps it carry down the fairway, while the reliable fade keeps powered backhands and forehands from drifting off line.

With flight numbers of 10 | 5 | -0.5 | 2, the Control fits between a neutral distance driver and a true wind-fighting option. It is a strong choice for controlled drives, long placement shots, and players who want speed without giving up predictable finish.

Axiom Tempo

The Axiom Tempo is a stable-to-overstable approach disc built for confident control on both forehand and backhand lines. It offers enough glide to cover approach distance while maintaining the torque resistance needed for powered releases.

With flight numbers of 4 | 4 | 0 | 2.5, the Tempo works well for straight-to-fade approaches, low ceiling shots, flex lines, and controlled drives. Its comfortable profile and predictable finish make it a reliable bridge between putters and midranges.

Axiom Fireball

The Axiom Fireball is an overstable control driver made for power, wind, and dependable placement. Its turn resistance and strong fade make it a trusted option for forehands, flex shots, skip finishes, and utility lines.

With flight numbers of 9 | 4 | 0 | 3.5, the Fireball delivers controlled speed without excessive glide. Players can lean on it when a shot must hold up to torque, fight out of an anhyzer angle, and finish hard near the target.

Axiom Aspect

The Axiom Aspect is a stable control driver built for straight power, dependable glide, and a clean finishing fade. Its neutral high-speed stability gives players confidence to commit to the line without worrying about unwanted turn.

With flight numbers of 9 | 5 | 0 | 2, the Aspect is suited for accurate fairway drives, controlled forehands, and placement shots that need distance with predictable finish. It offers useful stability without becoming overly demanding or sharply overstable.

Keep your CF20 disc golf retriever on the course with genuine Max Disctance CF20 Parts. Every part of our CF Series carbon fiber retrievers is replaceable, so a broken section or worn clip is a quick fix instead of a new pole.

CF20 Replacement Parts for Your Carbon Fiber Disc Retriever Pole

Quantity Discounts

• Buy 2: 10% off
• Buy 3: 15% off
• Buy 5 or more: 20% off

Parts Available

• Sections 1 to 16: individual inner sections. Section 1 comes with the metal threads already installed
• Outer Shell Aluminum Threads: a complete outer shell assembly with the upgraded aluminum threads, clip assembly, threaded bottom cap, rubber top cap and label
• Aluminum Threads & Cap: replaces the entire thread assembly at the base of the outer section (with rubber washer insert), upgrading the plastic 3D printed threads that originally came with CF Series retrievers
• Plastic Bottom Cap: replacement 3D printed plastic bottom cap, for CF Series only
• Clip Assembly: the retaining S-Clip, key rings and plastic clip tip
• Plastic Clip Tip: the plastic clip on the end of Section 1 that holds the key ring the S-Clip attaches to, keeping the retriever collapsed when not in use
• Rubber Top Cap: replacement rubber dust cap that also helps keep the sections from sliding out on their own
• Rubber Top Cap with Lower Clip: the lower clip assembly that helps keep the retriever closed when not in use

How Sections Are Numbered

Inner sections are numbered from smallest to largest, 1 to 16 on the CF20. Section 1 is the smallest section, with metal threads for the attachment. Section 16, the last section, has a red line so you can see when it has been fully extended.

Compatibility

These parts do not fit XF Series retrievers. Not sure which version you have? See how to tell XF and CF retrievers apart.

Parts Guide

Section numbering

Section numbering (longer models)

Clip Assembly

Aluminum Threads & Cap

Rubber Top Cap with Lower Clip

Keep your XF16 disc golf retriever on the course with genuine Max Disctance XF16 Parts. Every part of our XF Series carbon fiber retrievers is replaceable, so a broken section or worn clip is a quick fix instead of a new pole.

XF16 Replacement Parts for Your Carbon Fiber Disc Retriever Pole

Quantity Discounts

• Buy 2: 10% off
• Buy 3: 15% off
• Buy 5 or more: 20% off

Parts Available

• Sections 1 to 13: individual inner sections. Section 1 comes with metal threads
• Outer Shell: a complete assembly, all attached, with the clip assembly (S-Clip, key rings and plastic clip), bottom cap, rubber top cap and label
• Clip Assembly: the retaining S-Clip, key rings and plastic clip tip
• Plastic Clip Tip: the plastic clip that holds the key ring to keep the retriever from extending
• Rubber Top Cap: replacement rubber dust cap that also helps keep the sections from sliding out on their own
• Rubber Top Cap with Lower Clip: the lower clip assembly that helps keep the retriever closed when not in use
• Replacement Bottom Cap: the cap for the bottom of the outer shell that keeps the sections stored inside

How Sections Are Numbered

Inner sections are numbered from smallest to largest, 1 to 13 on the XF16. Section 1 is the smallest section, with metal threads for the attachment. Section 13, the last section, has a red line so you can see when it has been fully extended.

Compatibility

Sections 6 and up do not fit CF Series retrievers. Not sure which version you have? See how to tell XF and CF retrievers apart.

Parts Guide

Section numbering

Outer Shell

Clip Assembly

Replacement Bottom Cap

Rubber Top Cap with Lower Clip

Carry your retriever comfortably and keep your hands free. The Max Disctance Shoulder Strap securely clips onto your carbon fiber disc golf retriever using two durable quick-release clamps, so you can carry it over your shoulder between throws. Your hands stay free for your bag, cart or next shot, and your retriever stays ready for the next water hazard.

Shoulder Strap for Carbon Fiber Disc Golf Retrievers

Features

• Comfortable hands-free shoulder carry
• Adjustable heavy-duty nylon webbing strap
• Durable, extra secure quick-release clamp mounts
• Installs in seconds with no modifications required
• Lightweight and strong, with high heat resistance

Options

• Colors: Blue, Green, Pink, Purple, Red and Black
• Retriever size: XF20 or XF30

Compatibility

Designed specifically for Max Disctance carbon fiber retrievers.